FIREClean (2 oz Bottle), Cleaner and Lubricant

(No reviews yet) Write a Review
0.13 LBS
Fixed Shipping Cost:
Current Stock:

FIREClean logo


FIREClean™ is a patent pending extreme performance gun oil that provides unmatched reliability and durability for your firearms. While odorless, biodegradable, and safe, FIREClean destroys carbon contamination and helps prevent future fouling. FIREClean is the choice of the best and most demanding shooters in the World- pro shooters, military special operations, and tactical law enforcement teams. They demand the best (possible performance), and FIREClean delivers. (See for yourself what a huge difference a little bottle can make in your shooting.) 

Made in U.S.A.   •   Odorless   •   Non-Toxic

FIREClean™ is simply the finest firearm lubricant available. It is designed for use in firearms - and built to address the problems inherant in shooting. Not repurposed from other industrial applications. FIREClean™ sticks to metal, resists "flinging" or blowing off of your gun. FIREClean™ is also extremely heat resistant, unlike conventional or synthetic oils. 

FIREClean™ cleans deeply - deeper than conventional brushing with noxious, hazardous solvents. The oil cleans "embedded" carbon fouling that is impossible to remove via brushing alone. By successfully fusing "cleaning" and "lubricating" functions for the first time, guns run longer and more reliably than ever. Cleaning is no longer a lengthy, painful, and hazardous chore.

FIREClean™ conditions metal - to resist carbon and other fouling buildup as well as providing durable lubricity. Firearms treated with FIREClean "blow out" fouling, rather than "trapping" fouling as other products do. In most cases, fouling can be simply "wiped off" with a rag or paper towel. Wire brushes with smelly solvants, dental picks to "pick off" carbon, etc. are a thing of the past.
FIREClean™ is a new and different approach to operating your firearm. While traditionally the focus has been on “proper lubrication” and “keeping the gun wet”, experience has taught us that friction is rarely the problem on normal metal surfaces in the operation of guns. While this may sound like sacrilege to many, consider this- when was the last time that manually cycling a clean dry firearm resulted in locking the gun up? The REAL ENEMY of successful firearms operation is heat and fouling- particularly carbon fouling. Carbon is the unavoidable byproduct of powder combustion in the firing process. Carbon adheres very, very strongly to metal surfaces. It is very abrasive, hence the “gritty” sounds typically encountered with dirty or fouled firearms. Cleaning carbon with traditional methods requires harsh and hazardous chemicals- toxicity to humans, eco-toxicity, flammability, hazardous and potentially explosive vapors are some of the typical dangers. Often, cleaning materials must be treated as hazardous waste before disposal. This leads to long term health concerns as well as risk and expense. Other methods of carbon removal involve scraping, grinding, and other mechanical methods. In addition to the time and difficulty of using these methods in a field environment, this can often lead to undesired wear on mechanical surfaces or on the finish of the firearm. The other problem that FIREClean™ solves exceptionally well is lubricant “burnoff” or evaporation due to heat generated in the firing process. Frankly, most firearms lubricant can’t stand the heat! When you are required to constantly re-lube your firearms, that is a telling sign that either your oil has evaporated or has “cooked off”. Evaporation is caused by low temperature thresholds and the volatility of the substances used. If the oil has a strong odor or smell at normal temperature that indicates that the oil is undergoing evaporation. If the oil is “smoking” in operation that tells you that thermal breakdown of the oil is happening. Either one of these cases will lead to the loss of lubrication, and typically the dried up or burned off oil creates gums and varnishes that are difficult to remove and lead to jamming.


Step One - Strip Firearm

Unload and field strip firearm according to the manufacturer's instructions. Wipe parts with a rag or quality paper towel. To degrease the gun, rubbing alcohol works. Shake product bottle and remove (and retain) red stopper. Apply FIREClean™ oil to fouled parts. It extracts fouling like you won’t believe. Allow to soak in overnight if possible. Wipe fouling off. Fouling may continue to "weep" out of the metal for a period of days, depending on the porosity of the metal and amount of fouling. Wipe the fouling as it comes out of the metal. You may see machining marks in upper receivers, bolts, etc that have been previously camouflaged by carbon fouling.

Step Two - Apply & Wipe

Once clean, apply a thin, even coat of FIREClean™ oil over all internal surfaces subject to carbon or friction. Wipe excess off. A cheap 1” paint brush works wonders for large (or hard to access) areas, as do QTips for small crevices.

Step Three - Condition

On parts you wish to fully condition, apply multiple thin layers of FIREClean™ until it is no longer absorbed into metal. The metal should have a "sheen" or "glisten".

Step Four - Assemble & Shoot

Shoot gun, reapply FIREClean™ oil as desired in cleaning / lubrication / conditioning process.